Hey I have just Installed Ubuntu and dont know even the ABC... of Linux.
So, Help me to install my modem. PLease give me easy Steps
So PLease Help me Yaar
Last edited by avk on Tue Jan 03, 2006 4:00 pm; edited 1 time in total
So, Help me to install my modem. PLease give me easy Steps
| Readme.txt file wrote: |
|
Smart Link Soft Modem for Linux ------------------------------- Introduction ============ This is Smart Link Soft Modem for Linux version 2.X. It provides full-featured 56K Voice Fax Modem. Features ======== Modem: V.92, V.90, V.34, V.32bis, V.23, V.22, V.21, Bell 103/212. Flow control: V.42, MNP 2-4. Compression: V.44, V.42bis, MNP5. Fax: Class 1. Voice: ADPCM voice compression, Digital Answering Machine. Requirements ============ CPU: Intel Pentium II, Celron. AMD K6, Cyrix 400MHz or higher. Memory: 64MB (may work also with 32MB). OS: Linux 2.4 series. Supported Hardware ================== HAMR5600 based AMR/CNR/MDC/ACR modem cards on the following Southbridge chips: - Intel ICH0, ICH2 - Via 686A, 686B, 8231, 8233 - SiS 630 - ALI 1535. SmartPCI56/561/562/563 based PCI modem cards. SmartUSB56 based USB modem. Installation ============ 1. Unpack tar.gz package file: $ gzip -dc slmdm-2.X.X.tar.gz | tar xf - 2. 'cd' to package directory: $ cd slmdm-2.X.X 3. Review and edit (if need) 'Makefile'. Note: Probably you will want to correct in Makefile path to your local linux kernel header files: KERNEL_INCLUDES=/path/to/linux/include Another way is to pass command line the parameter while running 'make': $ make KERNEL_INCLUDES=/path/to/linux/include ... 4. Run 'make' command to compile package: $ make 5. Install. If you are going to use AMR/CNR/PCI modem type (as superuser): # make install-amr , or # make install-usb if you are going to use USB modem. It will install: - modem kernel modules slmdm.o (modem core), slfax.o (fax) into '/lib/modules/<kernel-version>/misc' directory (standard linux modules' directory). - hardware specific kernel module slamrmo.o (for AMR/CNR/PCI) or slusb.o (for USB) into '/lib/modules/<kernel-version>/misc' directory (standard linux modules' directory). - country settings data file 'country.dat' into directory '/etc'. Also it will: - create character tty device entry '/dev/ttySL0' with major number 212 and symbolic link 'dev/modem'. - config you '/etc/modules.conf' file in order to provide possibility for loading the modem modules into kernel on demand automatically by kmod, when you are going to use them. Note: currently you cannot use both AMR/CNR/PCI and USB Modems. 6. Config modem country. You can configure your current country by using module parameters 'country' or 'country_code'. Add 'options' directive line to file '/etc/modules.conf': options slmdm country=<MyCountry> , for example options slmdm country=USA , or use module parameter while module loading: # modprobe slmdm country=<MyCountry> Use 'slver -c' to see list of all supported countries and their codes (utility 'slver' may be found in package directory). Note: Command ATI7 shows installed country setting. 7. Using the modem. Installation will automatically create character tty device entry '/dev/ttySL0' with major number 212 and symbolic link '/dev/modem'. Use one of them as modem device for your dialing application. 8. Uninstallation. In package directory just type: # make uninstall Using RPM ========= 1. Build SRPM and RPM from tar.gz package: In order to build RPM and SRPM run command: # rpm -ta slmdm-2.X.X.tar.gz It will build in your RPM directory: - slmdm-2.X.X-Y.src.rpm - Source SRPM package - slmdm-2.X.X-Y.i386.rpm - Core Modem RPM package - slmdm-amr-2.X.X-Y.i386.rpm - AMR/CNR/PCI Modem driver - slmdm-usb-2.X.X-Y.i386.rpm - USB Modem driver 2. Install To install Modem core package run: # rpm -i /path/to/slmdm-2.X.X-Y.i386.rpm To install Modem hw driver run: # rpm -i /path/to/slmdm-amr-2.X.X-Y.i386.rpm if you are going to use AMR/CNR/PCI Modem, or # rpm -i /path/to/slmdm-usb-2.X.X-Y.i386.rpm if you are going to use SmartUSB56 Modem. Note: currently you cannot install and use both AMR/CNR/PCI and USB Modems. 3. Uninstall. # rpm -e slmdm slmdm-<amr|usb> |
So PLease Help me Yaar
Last edited by avk on Tue Jan 03, 2006 4:00 pm; edited 1 time in total
... it's just the symbol that indicates ur shell ... like C:\ on DOS ? ... anyway ... if u try doing the steps and get some weird stuff then please tell me about it ? just tell about ur attempts here and we'll try to see what's wrong ? ... it should be fairly easy ... if not we'll google together 
